No vacuum step
The film is applied directly and cured in place, so the workflow skips vacuum lamination entirely — fewer steps per phone, less equipment per bench.
No vacuum needed
0.18 mm UV Curing Film
A surface-fitting UV curing film that needs no vacuum step. Cut it on the plotter, lay it down, and cure it in place — 0.18 mm thick with full screen coverage and a self-healing surface.
0.18 mm
Total thickness
2
Surface finishes
No vacuum
Installation
65,000+
Cutting templates
How it behaves at the bench
Cut to the model, not to a template roll
Files are cut per device from the model database, so the film follows the actual screen outline instead of being trimmed down from a stock rectangle.
Technical specification
Values are taken from the manufacturer's own material for this film. Items still pending are marked as such.
| Specification | 0.18 mm UV Curing Film |
|---|---|
| Total thickness | 0.18 mm |
| Surface finishes | HD / Matte |
| Installation | No vacuum step required |
| Coverage | Full screen coverage |
| Surface treatment | Vacuum-plated oleophobic layer |
| Self-healing | Yes |
| Cutting templates | 65,000+ (factory figure) |
Other films in this group
Cut on the same systems, from the same template library — the choice is thickness, surface and hardness.
Vacuum + UV cure
0.25 mm HD UV Curing Film
Clear, for curved screens. Vacuumed and cured under a UV lamp to a 7H surface.
View 0.25 mm HD UV Curing Film → Matte · anti-fingerprint 0.25 mm Matte UV Curing FilmThe glare-cutting build. Fine matte and an anti-fingerprint layer, same process.
View 0.25 mm Matte UV Curing Film → 30° anti-peep 0.25 mm Privacy UV Curing FilmSide views go dark, the front stays clear. A micro-louvre layer, not a mesh grid.
View 0.25 mm Privacy UV Curing Film →